WAGNER offers devices, equipment and systems for all areas of industrial surface coating. Our innovative products and solutions stand out in terms of their quality, efficiency and productivity.
The WAGNER FlexControl Smart is a new, electronically controlled 2-K mixing and dosing system. Electronic mixing guarantees consistently optimal mixing accuracy and quick recipe changes. Another advantage of electronic mixing is that you only mix as much as you need, thus reducing waste considerably. The simple operation saves time and prevents operating errors.
WAGNER's competitive FlexControl Smart system generally comes with the following minimum configuration:
Building on these features, there are basic systems specially configured for high and low pressure, or ATEX and non-ATEX applications. In addition, you can choose between two versions with a small or large number of extension options.
That way you don’t have to pay for what you don’t need. Based on the 8 basic systems, the FlexControl Smart can be tailored to your specific requirements according to modular principles.
To make it easier to choose, there are also various sets available. These are basic systems which come with common features already installed, e.g. AIS or gun flush box connection.
In contrast to all other measuring systems (gear flow meter, coriolis flow meter, gear pump), the WAGNER stroke sensor system undertakes indirect measurement of the flow (paints, hardening agents), as there is no direct contact with the material. This provides unbeatable advantages:
NEW! The AIS dispensing system from WAGNER, patent pending.
The AIS (Adaptive Injection System) controls the dispensing valve stroke fully automatically. With the new WAGNER AIS, the B-component is injected in smooth cycles, almost without interruptions. This results in a practically homogeneous addition of the B-component even before mixing. Until now, the injection process was perceptibly controlled by timed pulses (see diagram). If the paint throughflow volume changes, e.g. due to a different number of guns or a new recipe, the dispensing system adapts fully automatically to the optimal mixing ratio. Using the AIS extension ensures a constant coating quality.
|FlexControl Smart 2-K mixing and dosing system|
|System voltage||115 / 230VAC|
|Frequency||50 / 60 Hz|
|Mixing accuracy||± 1%|
|Mixing ratio||0.1:1 - 50:1|
|Material pressure||1-250 bar|
|Material input||G 1/4"|
|Material output||1/4" NPS|
|Material temperature||+ 5 °C - + 60 °C, +41 °F - +140 °F|
|Material viscosity||20-2200 mPas|
|Flow rate||50-3000 cc/min|
|Ambient temperature||+ 5 °C - + 40 °C, +41 °F - +104 °F|
|Flushing agent A||2|
|Flushing agent B||2|
|Material pH value||PH 3.5-9|
|Size||BxHxT 530x1325x340 mm|